The peer-address command configures a peer IP address for an NQA PWE3 ping test instance.
The undo peer-address command restores the default configuration.
By default, no peer IP address is configured for an NQA PWE3 ping test instance.
peer-address peeraddress
undo peer-address peeraddress
Specifies a peer IP address for an NQA PWE3 ping test instance.
The value is in dotted decimal notation.
NQA view
2: Configuration level
Usage Scenario
To configure a peer IP address for an NQA PWE3 ping test instance, run the peer-address command.
<HUAWEI> system-view [~HUAWEI] nqa test-instance user test [*HUAWEI-nqa-user-test] test-type pwe3ping [*HUAWEI-nqa-user-test] peer-address 1.1.1.1