peer-address (PWE3 trace test instance)

Function

The peer-address command configures a peer IP address for an NQA PWE3 trace test instance.

The undo peer-address command restores the default configuration.

By default, no peer IP address is configured for an NQA PWE3 trace test instance.

peer-address peeraddress

undo peer-address peeraddress

Parameter	Description	Value
peeraddress	Specifies a peer IP address for an NQA PWE3 trace test instance.	The value is in dotted decimal notation.

Parameter

Description

Value

peeraddress

Specifies a peer IP address for an NQA PWE3 trace test instance.

The value is in dotted decimal notation.

NQA view

2: Configuration level

Task Name	Operations
sla	write

Usage Scenario

To configure a peer IP address for an NQA PWE3 trace test instance, run the peer-address command.

# Set the peer IP address to 1.1.1.1 for an NQA PWE3 trace test instance.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type pwe3trace
[*HUAWEI-nqa-user-test] peer-address 1.1.1.1