qinq stacking

Function

The qinq stacking vid command enables QinQ stacking on an Ethernet sub-interface.

The undo qinq stacking vid command disables QinQ stacking on an Ethernet sub-interface.

By default, QinQ stacking is not enabled on an Ethernet sub-interface.

Format

qinq stacking

undo qinq stacking

Parameters

None

Views

100ge sub-interface view, 10GE sub-interface view, 200GE sub-interface view, 25GE sub-interface view, 400GE sub-interface view, 40GE sub-interface view, 50GE sub-interface view, Eth-Trunk sub-interface view, GE sub-interface view, Global VE sub-interface view, VE sub-interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ethernet	write

Usage Guidelines

Usage Scenario

One physical interface cannot provide L2VPN access to multiple users. To address this problem, you can run the qinq stacking vid command to configure a QinQ stacking sub-interface and bind it to a VSI or L2VC to provide L2VPN access to multiple users.

Prerequisites

Before running the qinq stacking vid command in the VE sub-interface view or global VE sub-interface view, the interface on which the sub-interface is to be created has been bound to a VE-Group.

Example

# Configure QinQ stacking on GE 0/1/1.4.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/1.4
[*HUAWEI-GigabitEthernet0/1/1.4] qinq stacking