qos-profile(Access service view)

Function

The qos-profile command configures the default QoS profile bound to an access service template.

The undo qos-profile command removes the default QoS profile bound to an access service template.

By default, the QoS profile with the index of 0 is bound to an access service template. This indicates that no QoS profile is bound to the access service template.

This command is supported only on the NetEngine 8000 F1A.

Format

qos-profile profile-name

undo qos-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a QoS profile.	The name is a string of 1 to 63 case-sensitive characters.

Parameter

Description

Value

profile-name

Specifies the name of a QoS profile.

The name is a string of 1 to 63 case-sensitive characters.

Views

Access service view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

If the RADIUS server sends a name of an access service template to implement the QoS function, you can run the qos-profile (access-service view) command to configure the default QoS profile bound to an access service template.

Prerequisites

The QoS profile to be bound has been created.

Configuration Impact

If the default QoS profile used by an access service template is configured and the authentication response message sent by the RADIUS server includes the HW-Access-Service attribute, the traffic bandwidth restriction is based on the rule of the QoS profile bound to an access service template.

Precautions

If an in-use QoS profile in an access service template is modified, the modification takes effect in real time. If all QoS profiles in an access service template are removed, the QoS profile that is previously bound with the user takes effect.

The command cannot be configured while the qos-profile is in time-range mode.

The command cannot be configured while the qos-profile is in 8cos-enhance mode.

Example

# Bind the QoS profile named ql to an access service template.

<HUAWEI> system-view
[~HUAWEI] qos-profile q1
[*HUAWEI-qos-profile-q1] commit
[~HUAWEI-qos-profile-q1] quit
[~HUAWEI] access-service huawei
[~HUAWEI-access-huawei] qos-profile q1