qos link-adjustment remote enable

Function

The qos link-adjustment remote enable command enables the last-mile QoS function.

The undo qos link-adjustment remote enable command disables the last-mile QoS function.

By default, the last-mile QoS function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

qos link-adjustment remote enable

undo qos link-adjustment remote enable

Parameters

None

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

You can configure the last-mile QoS function (remote packet adjustment value) only after enabling the last-mile QoS by running the qos link-adjustment remote enable command.

If the qos link-adjustment remote enable command is configured in the AAA domain view, the last-mile QoS function takes effect on only L2TP services.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the last-mile QoS function on AAA domain huawei.

<HUAWEI> system-view
[~HUAWEI] aaa
[*HUAWEI-aaa] domain huawei
[*HUAWEI-aaa-domain-huawei] qos link-adjustment remote enable