qos trust-cp-mode enable

Function

The qos trust-cp-mode enable command enables a device to trust the CP mode.

The undo qos trust-cp-mode enable command disables a device from trusting the CP mode.

By default, a device does not trust the CP mode.

This command is supported only on the NetEngine 8000 F1A.

Format

qos trust-cp-mode enable

undo qos trust-cp-mode enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

In CU separation scenarios, UCL functions are delivered from the UP side by default. If UCL functions need to be delivered from the CP side, run the qos trust-cp-mode enable command to enable the UP side to trust the CP mode. After this command is run, the following information will be deleted from the UP side:

UCL template
if-match acl command
Pre-upgrade traffic classifiers, traffic behaviors, and traffic policies

Precautions

This command cannot be run to switch the mode when users are online.
This command cannot be run repeatedly for secondary switching within 5 minutes.
This command cannot be run if the cu-agent command is not run.

Example

# Enable a device to trust the CP mode.

<HUAWEI> system-view
[~HUAWEI] qos trust-cp-mode enable