qppb qos-local-id

Function

The qppb qos-local-id command enables QPPB globally.

The undo qppb qos-local-id command disables QPPB globally.

By default, QPPB is disabled globally.

Format

qppb qos-local-id { source | destination | both inbound }

undo qppb qos-local-id { source | destination | both inbound }

Parameters

Parameter	Description	Value
source	Indicates source address-based QPPB.	-
destination	Indicates destination address-based QPPB.	-
both	Indicates source address- and destination address-based QPPB.	-

Parameter

Description

Value

source

Indicates source address-based QPPB.

destination

Indicates destination address-based QPPB.

both

Indicates source address- and destination address-based QPPB.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

To implement QoS scheduling for packets received on multiple interfaces based on BGP route attributes, run the qppb qos-local-id command to enable QPPB globally.

Prerequisites

A traffic policy has been globally applied and allows unified QoS scheduling for packets that have the same attributes and are sent from different interfaces.

This command is supported only on the admin VS.

Example

# Enable source-address-based QPPB globally.

<HUAWEI> system-view
[~HUAWEI] qppb qos-local-id source