radius-attribute
Function
The radius-attribute command configures the mode of encapsulating user IP addresses.
The undo radius-attribute command restores the default configuration.
By default, a user address is encapsulated in version 1 mode. Only an effective address for which a routing entry has been generated can be encapsulated into the attributes of the RADIUS server. Without an effective address, the attributes will not be delivered by the RADIUS server.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| framed-ip-address |
Indicates the attributes of a user's IPv4 address. |
- |
| delegated-ipv6-prefix |
Indicates the attributes of Delegated-IPv6-Prefix. |
- |
| encapsulation-method |
Indicates the mode of encapsulating the attributes of IP addresses. |
- |
| version1 |
Indicates that a user address is encapsulated in version 1 mode by default, which means only an effective address can be encapsulated into the attributes of the RADIUS server. |
- |
| version2 |
Indicates that encapsulating attributes in version 2 mode requires an effective address for encapsulation. Without an effective address, use the ineffective address delivered by a RADIUS server for encapsulation. Without either address, the attributes will not be delivered by the RADIUS server. |
- |
Usage Guidelines
Usage Scenario
The radius-attribute command configures an encapsulation mode for user IP addresses.
Encapsulating attributes in version 2 mode requires an effective address for encapsulation. Without an effective address, use the ineffective address delivered by a RADIUS server for encapsulation.Precautions
In VS mode, this command is supported only by the admin VS.