radius-attribute support vendor

Function

The radius-attribute support vendor command configures the attribute which is allowed to be parsed.

The undo radius-attribute support vendor command cancels the configuration of the attribute which is allowed to be parsed.

Currently, only the radius-attribute support vendor 9 1 ip:addr-pool can be configured.

By default, the attribute cannot be parsed.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute support vendor vendorid subattrid attributename

undo radius-attribute support vendor vendorid subattrid attributename

Parameters

Parameter	Description	Value
vendorid	Vendor ID.	The value is an integer that ranges from 1 to 4294967295.
subattrid	Sub attribute ID.	The value is an integer that ranges from 1 to 255.
attributename	Attribute name.	The value is a string of 1 to 64 case-sensitive characters, spaces not supported. Currently, only the ip:addr-pool can be configured.

Parameter

Description

Value

vendorid

Vendor ID.

The value is an integer that ranges from 1 to 4294967295.

subattrid

Sub attribute ID.

The value is an integer that ranges from 1 to 255.

attributename

Attribute name.

The value is a string of 1 to 64 case-sensitive characters, spaces not supported.

Currently, only the ip:addr-pool can be configured.

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

By default, the device does not parse the Cisco attribute delivered by the RADIUS server. After the radius-attribute support vendor command is run, the device parses attribute 1 (ip:addr-pool) and reads the name of the address pool.

Example

# Configure to support the parsing of Cisco No. 1 attribute (ip:addr-pool).

<HUAWEI> system-view
[~HUAWEI] radius-server group huawei
[*HUAWEI-radius-huawei] commit
[~HUAWEI-radius-huawei] radius-attribute support vendor 9 1 ip:addr-pool