radius-server accounting-copy realtime disable

Function

The radius-server accounting-copy realtime disable command enables a device to stop sending real-time accounting packets to RADIUS accounting copy servers.

The undo radius-server accounting-copy realtime disable command restores the default configuration.

By default, a device sends real-time accounting packets to RADIUS accounting copy servers.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server accounting-copy realtime disable

undo radius-server accounting-copy realtime disable

Parameters

None

Views

AAA domain view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

If a RADIUS accounting copy server cannot process a large number of real-time accounting packets due to limited performance, run the radius-server accounting-copy realtime disable command to disable a device from sending real-time accounting packets to the accounting copy server to reduce the load of the server.

Prerequisites

Accounting packet copy has been enabled using the accounting-copy command.

Configuration Impact

After the radius-server accounting-copy realtime disable command is run, the device will not send real-time accounting packets for users and services to copy servers even if the copy servers have been configured in the domain.

Precautions

The radius-server accounting-copy realtime disable command takes effect immediately for online users.

In VS mode, this command is supported only by the admin VS.

Example

# Enable a device to stop sending real-time accounting packets to RADIUS accounting copy servers.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain huawei
[*HUAWEI-aaa-domain-huawei] commit
[~HUAWEI-aaa-domain-huawei] radius-server accounting-copy realtime disable