radius-server accounting-stop-packet send

Function

The radius-server accounting-stop-packet send force command enables accounting stop packets to be sent forcibly.

The undo radius-server accounting-stop-packet send force disables accounting stop packets from being sent forcibly.

By default, the accounting stop packets are disabled from being sent forcibly.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server accounting-stop-packet send force

undo radius-server accounting-stop-packet send force

Parameters

None

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

Generally, the RADIUS server generates a user entry only after the accounting succeeds. However, some RADIUS server users who have passed the authentication generate user entries in the database before the accounting, when they apply for IP addresses, for example. If the accounting fails due to some reasons, the IP addresses cannot be released, and users cannot go online. To address this problem, configure the radius-server accounting-stop-packet send force command to force the NetEngine 8000 F to send accounting stop packets to the RADIUS server to release the IP addresses.

Configuration Impact

After the radius-server accounting-stop-packet send force command is run, the NetEngine 8000 F sends an accounting stop packet to the RADIUS server if the accounting for an authenticated user fails.

The command takes effect only when the accounting for the authenticated user fails and there is a user entry in the database.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable accounting stop packets to be sent forcibly in the RADIUS server group Huawei.

<HUAWEI> system-view
[~HUAWEI] radius-server group huawei
[*HUAWEI-radius-huawei] commit
[~HUAWEI-radius-huawei] radius-server accounting-stop-packet send force