radius-server accounting cache retransmit
Function
The radius-server accounting cache retransmit command configures an interval at which cached RADIUS accounting packets are retransmitted and the number of users for each packet retransmission.
The undo radius-server accounting cache retransmit command restores the default configuration.
By default,theinterval at which cached RADIUS accounting packets are retransmitted and the default number of users for each packet retransmission are 10s and 1, respectively.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| retransmit retransmit |
Specifies the number of users for each packet retransmission. |
The value is an integer ranging from 1 to 30. The default value is 1. |
| timeout timeout |
Specifies an interval at which cached RADIUS accounting packets are retransmitted. |
The value is an integer ranging from 1 to 10, in seconds. The default value is 10. |
Usage Guidelines
Usage Scenario
If a large value is configured for the maximum number of accounting packets that can be cached in the radius-server accounting cache command, you can run the radius-server accounting cache retransmit command to configure an interval at which cached RADIUS accounting packets are retransmitted and the number of users for each packet retransmission, improving packet transmission performance.
Configuration Impact
After the radius-server accounting cache retransmit command is run, cached RADIUS accounting packets of the number of users specified by retransmit are retransmitted at the interval specified by timeout.
Precautions
In VS mode, this command is supported only by the admin VS.