radius-server class-as-car

Function

The radius-server class-as-car command configures a packet to carry the CAR value.

The undo radius-server class-as-car command prevents a packet from carrying the CAR value.

By default, a packet does not carry the CAR value.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server class-as-car [ enable-pir ]

undo radius-server class-as-car [ enable-pir ]

Parameters

Parameter	Description	Value
enable-pir	Indicates that the PIR is valid. By default, the PIR is invalid.	-

Parameter

Description

Value

enable-pir

Indicates that the PIR is valid. By default, the PIR is invalid.

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

As specified in the standard RADIUS protocol, the Class attribute carried in an access-accept packet sent from the RADIUS server to the client must be returned to the accounting server without any change in an accounting-request packet. Based on the standard protocol, the device makes extensions by adding the function of transferring the committed access rate (CAR) values. That is, in the implementation of the Class attribute, the CAR value in the Class field is carried.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the packet to carry the CAR value.

<HUAWEI> system-view
[~HUAWEI] radius-server group huawei
[*HUAWEI-radius-huawei] commit
[~HUAWEI-radius-huawei] radius-server class-as-car