radius-server connect-info

Function

The radius-server connect-info command enables authentication and accounting request packets to use the Connect-Info attribute to carry the uplink and downlink rates negotiated between the BRAS and DSLAM.

The undo radius-server connect-info command disables authentication and accounting request packets from using the Connect-Info attribute to carry the uplink and downlink rates negotiated between the BRAS and DSLAM.

By default, the Connect-Info attribute carries the rate limit configured on the BRAS.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server connect-info include refer-option82

undo radius-server connect-info include refer-option82

Parameters

None

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

In RADIUS authentication or accounting, to allow a device to trust the Option 82 field and use the Connect-Info attribute to carry the uplink and downlink rates obtained from the Option 82 field, run the radius-server connect-info command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable authentication and accounting request packets to use the Connect-Info attribute to carry the uplink and downlink rates negotiated between the BRAS and DSLAM.

<HUAWEI> system-view
[~HUAWEI] radius-server group huawei
[*HUAWEI-radius-huawei] commit
[~HUAWEI-radius-huawei] radius-server connect-info include refer-option82