radius-server group(Prepaid profile view)

Function

The radius-server group command sets the RADIUS server group for a prepaid profile.

The undo radius-server group cancels the RADIUS server group for a prepaid profile.

By default, no RADIUS server group has been configured for a prepaid profile.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server group group-name

undo radius-server group [ group-name ]

Parameters

Parameter	Description	Value
group-name	Specifies the name of the RADIUS server group.	The value is a string of 1 to 32 characters containing uppercase letters (A to Z), lowercase letters (a to z), numbers (0 to 9), punctuation mark ".", and conjunctive punctuation such as dash "-" and underline "_".

Parameter

Description

Value

group-name

Specifies the name of the RADIUS server group.

The value is a string of 1 to 32 characters containing uppercase letters (A to Z), lowercase letters (a to z), numbers (0 to 9), punctuation mark ".", and conjunctive punctuation such as dash "-" and underline "_".

Views

Prepaid profile view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

When the service requires a specified RADIUS server to authenticate users and conduct accounting, you can set the RADIUS server group to be used by running this command.

Prerequisites

The server group has already been configured.

Configuration Impact

After the radius-server group command is run, the specified RADIUS server group is used for authentication and accounting.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the RADIUS server group for a prepaid profile named test as rd1.

<HUAWEI> system-view
[~HUAWEI] radius-server group rd1
Info: Create a new server group
[*HUAWEI-radius-rd1] commit
[~HUAWEI-radius-rd1] quit
[~HUAWEI] prepaid-profile test
[~HUAWEI-prepaid-profile-test] radius-server group rd1