radius-server nas-ip-address(RADIUS server group view)

Function

For NetEngine 8000 F1A, the radius-server nas-ip-address command configures a NAS-IP address for a device.

The undo radius-server nas-ip-address command restores the default setting.

For NetEngine 8000 F2A, the radius-server nas-ip-address command configures the IP address of NAS (Network Access Server) for the group.

The undo radius-server nas-ip-address command deletes the IP address of NAS from the group.

By default, the IP address of the outbound interface for RADIUS packets is used as the NAS-IP address.

Format

radius-server nas-ip-address ip-address

undo radius-server nas-ip-address

Parameters

Parameter	Description	Value
ip-address	Specifies a NAS-IP address.	The value is in dotted decimal notation.

Parameter

Description

Value

ip-address

Specifies a NAS-IP address.

The value is in dotted decimal notation.

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

The radius-server nas-ip-address command is used to configure a device's NAS-IP address as the destination IP address of a response packet to be sent from the RADIUS server.

In VS mode, this command is supported only by the admin VS.

Example

# Configure NAS-IP Address for the group.

<HUAWEI> system-view
[~HUAWEI] radius-server group group1
[~HUAWEI-radius-group1] radius-server nas-ip-address 10.1.1.1