radius-server nas-port-id lns include

Function

The radius-server nas-port-id lns include command configures the format of the NAS-Port-Id attribute sent by the L2TP LNS to the RADIUS server.

The undo radius-server nas-port-id lns command deletes the configured format of the NAS-Port-Id attribute sent by the L2TP LNS to the RADIUS server.

By default, the LNS or a non-LNS device retains the format of the NAS-Port-Id attribute to be sent to the RADIUS server.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server nas-port-id lns include [ string string | ip delimiter ] { local-tunnel-ip [ delimiter ] | peer-tunnel-ip [ delimiter ] | local-tunnel-id [ delimiter ] | peer-tunnel-id [ delimiter ] | local-session-id [ delimiter ] peer-session-id [ delimiter ] | call-serial-number [ delimiter ] } ^*

undo radius-server nas-port-id lns

Parameters

Parameter	Description	Value
string string	Specifies a user-defined character string.	The value is a string of 1 to 31 characters.
ip	Indicates a character string.	-
delimiter	Indicates a delimiter.	The value is b, *, -, \, #, $, @, &, :.
local-tunnel-ip	Indicates the source IP address of the local tunnel.	-
peer-tunnel-ip	Indicates the IP address of the remote tunnel.	-
local-tunnel-id	Indicates the local tunnel ID.	-
peer-tunnel-id	Indicates the remote tunnel ID.	-
local-session-id	Indicates the local session ID.	-
peer-session-id	Indicates the remote session ID.	-
call-serial-number	Indicates the session serial number.	-

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

If the RADIUS server has special requirements on the format of the NAS-Port-Id attribute, run the radius-server nas-port-id lns or radius-server nas-port-id command to configure the format of the NAS-Port-Id attribute as required.

Configuration Impact

If the radius-server nas-port-id lns or radius-server nas-port-id command is run more than once in the same view, the latest configuration overrides the previous one. After the radius-server nas-port-id lns or radius-server nas-port-id command is run, the NAS-Port-Id attribute is sent to the RADIUS server in the configured format.

Example

# Configure the format of the NAS-Port-Id attribute sent by the L2TP LNS to the RADIUS server.

<HUAWEI> system-view
[~HUAWEI] radius-server group test1
[*HUAWEI-radius-test1] commit
[~HUAWEI-radius-test1] radius-server nas-port-id lns include ip $ local-tunnel-id - local-session-id - local-tunnel-ip $