radius-server packet (System view)

Function

The radius-server packet command sets the DSCP value for RADIUS packets sent by the device to a RADIUS server.

The undo radius-server packet command restores the default DSCP value for RADIUS packets sent by the device to a RADIUS server.

By default,the DSCP value is 32.

Format

radius-server packet dscp dscp-value

undo radius-server packet dscp [ dscp-value ]

Parameters

Parameter Description Value
dscp dscp-value

Specifies the DSCP value for RADIUS packets.

The value is an integer ranging from 0 to 63.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
radius write

Usage Guidelines

Usage Scenario

The radius-server packet command can be used to increase the DSCP value for RADIUS packets sent by the device to a RADIUS server, preventing RADIUS packet loss during network congestion.

NOTE:

Setting a DSCP value for the RADIUS packets sent by thedevice to a RADIUS server does not affect the DSCP value in RADIUS packets sent by the device to an AP/AC.

Configuration Impact

If the radius-server packet command is run in both the system view and RADIUS server group view, the setting in the RADIUS server group view takes precedence over that in the system view.

Example

# Set the DSCP value to 50 in RADIUS packets that the device sends to a RADIUS server.
<HUAWEI> system-view
[~HUAWEI] radius-server packet dscp 50
Parent Topic: AAA and User Management Configuration Commands (Administrative User)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >