radius-server send adjust system-state optimize accounting-interim-packet

Function

The radius-server send adjust system-state optimize accounting-interim-packet command enables a device to adjust the sending of RADIUS real-time accounting packets based on the system status.

The undo radius-server send adjust system-state optimize accounting-interim-packet command restores the default configuration.

By default, a device stops sending RADIUS real-time accounting packets when the main control board's memory usage reaches 85%.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server send adjust system-state optimize accounting-interim-packet

undo radius-server send adjust system-state optimize accounting-interim-packet

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
radius write

Usage Guidelines

In RADIUS accounting scenarios with a large number of online users, when the memory usage of the device has reached 85% but more users are going online, run the radius-server send adjust system-state optimize accounting-interim-packet command to allow the device to continue sending RADIUS real-time accounting packets until the memory usage reaches a value of restart threshold - 1%.

Example

# Enable the device to adjust the sending of RADIUS real-time accounting packets based on the system status.
<HUAWEI> system-view
[~HUAWEI] radius-server send adjust system-state optimize accounting-interim-packet
Parent Topic: AAA and User Management Configuration (Access User)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >