radius enable(System view)

Function

The radius enable command enables the RADIUS protocol.

The undo radius enable command disables the RADIUS protocol.

By default, the RADIUS protocol is enabled.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

radius enable

undo radius enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

After executing the radius enable command, the RADIUS client starts to serve the AAA authentication request. After executing the undo radius enable command, the RADIUS client stops to serve the AAA authentication request.

If the undo radius enable command is run when a user is performing RADIUS authentication, the command does not take effect.

In VS mode, this command is supported only by the admin VS.

Example

# Enable the RADIUS protocol.

<HUAWEI> system-view
[~HUAWEI] radius enable