realtime-accounting backup enable

Function

The realtime-accounting backup enable command enables real-time accounting backup between the master and slave main control boards.

The undo realtime-accounting backup enable command restores the default configuration.

By default, real-time accounting backup is disabled between the master and slave main control boards. After a master/slave main control board switchover, the real-time accounting interval is reset.

Format

realtime-accounting backup enable

undo realtime-accounting backup enable

Parameters

None

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

Run the realtime-accounting backup enable command if the RADIUS server requires that the interval at which real-time accounting packets are sent be strictly followed.

Configuration Impact

By default, the real-time accounting interval is reset after a master/slave main control board switchover. If a master/slave main control board switchover occurs during the real-time accounting interval, the real-time accounting interval is reset, and the device will send real-time accounting packets after this interval elapses, which is longer than the configured interval.

After the realtime-accounting backup enable command is run, the master and slave main control boards start real-time accounting at the same time. Even if a master/slave main control board switchover occurs during the real-time accounting interval, the device still sends real-time accounting packets at the configured interval.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable real-time accounting backup between the master and slave main control boards.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] realtime-accounting backup enable