reauthentication interval

Function

The reauthentication interval command sets the interval for re-authentication for online dot1x template users.

The undo reauthentication interval command restores the default setting.

By default, the interval for re-authentication for online dot1x template users is 57600 seconds.

Format

reauthentication interval time

undo reauthentication interval

Parameters

Parameter	Description	Value
time	Specifies the interval for re-authentication.	The value is an integer ranging from 0 to 65535, in seconds. If the value is set to 0, no re-authentication is performed.

Parameter

Description

Value

time

Specifies the interval for re-authentication.

The value is an integer ranging from 0 to 65535, in seconds. If the value is set to 0, no re-authentication is performed.

Views

802.1X template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bas-eap	write

Usage Guidelines

Usage Scenario

If users go online through 802.1X authentication, run the reauthentication interval command to set the interval for the BRAS to send re-authentication request packets. If re-authentication fails, the users are logged out to ensure that only authorized users can access the network.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the interval for re-authentication for dot1x template users to 360 seconds.

<HUAWEI> system-view
[~HUAWEI] dot1x-template 1
[~HUAWEI-dot1x-template-1] reauthentication interval 360