reauthorize enable

Function

The reauthorize enable command enables command-line reauthorization.

The undo reauthorize enable command disables command-line reauthorization.

By default, command-line reauthorization is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

reauthorize enable

undo reauthorize enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

If you cannot change the user group to which an online user belongs because the dynamic authorization server is Down, run the reauthorize enable command to enable command-line reauthorization.

Follow-up Procedure

Run the reauthorize command to change the user group to which an online user belongs.

NOTE:

In network planning, ACLs are used to control user access authority, and ACL rules are configured based on user groups. Therefore, to change a user's access authority, you can change the user group. For example, ACL rules are configured to allow user group 1 to access only the internal network and user group 2 to access both internal and external networks. When user A in user group 1 goes online, user A can access the internal network only. To allow user A to access both internal and external networks, reauthorize user A by changing its user group to user group 2.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable command-line reauthorization.

<HUAWEI> system-view
[~HUAWEI] reauthorize enable