system recording-scheme

Function

The system recording-scheme command configures a scheme in which system events are recorded.

The undo system recording-scheme command cancels the configuration.

By default, no system events are recorded.

Format

system recording-scheme recording-scheme-name

undo system recording-scheme

Parameters

Parameter	Description	Value
recording-scheme-name	Specifies the name of a recording scheme.	The value is a string of 1 to 32 characters. The scheme name must comply with the naming rules of Windows. The value cannot contain such characters as slash (\), backslash (/), colon (:), asterisk (*), question mark (?), quotation mark ("), or angle brackets (< >).

Parameter

Description

Value

recording-scheme-name

Specifies the name of a recording scheme.

The value is a string of 1 to 32 characters. The scheme name must comply with the naming rules of Windows. The value cannot contain such characters as slash (\), backslash (/), colon (:), asterisk (*), question mark (?), quotation mark ("), or angle brackets (< >).

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

At present, only events caused by the reboot command can be recorded.

Prerequisites

The recording-scheme command has been run to configure a recording scheme.

Example

# Configure recording scheme test to record system events.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] recording-scheme test
[*HUAWEI-aaa-recording-test] quit
[*HUAWEI-aaa] system recording-scheme test