redirect-cpu http-redirect-chasten

Function

The redirect-cpu http-redirect-chasten command to run to configure the next hop of the packets to send to the CPU according to limits of idle web users.

The undo redirect-cpu http-redirect-chasten command disables the configuration of redirection to the next hop.

By default, the next hop of the packets to send to the CPU according to limits of idle web users function is not configured.

This command is supported only on the NetEngine 8000 F1A.

Format

redirect-cpu http-redirect-chasten

undo redirect-cpu http-redirect-chasten

Parameters

None

Views

Traffic behavior view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
portal	write

Usage Guidelines

Usage Scenario

Limits of idle web users: Configure this behavior upstream on global UCL to redirect matched pre-authentication packets to new cp-car.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the next hop of the packets. The next hop sends to the CPU according to limits of idle web users

<HUAWEI> system-view
[~HUAWEI] traffic behavior b1
[*HUAWEI-behavior-b1] redirect-cpu http-redirect-chasten