The reflect between-clients command enables route reflection among clients through the RR.
The undo reflect between-clients command disables route reflection among clients through the RR. If the clients of an RR are fully meshed, you can prohibit route reflection among clients through the RR to reduce the cost.
By default, route reflection among clients through the RR is enabled.
Usage Scenario
On some networks, if the clients of an RR establish full-mesh connections with each other, they can directly exchange routing information. Route reflection among clients through the RR is unnecessary. The undo reflect between-clients command can be used to prohibit the clients from reflecting routes to each other to reduce costs.
Prerequisites
An RR has been configured.
Configuration Impact
After the undo reflect between-clients command is run, the clients of an RR are prohibited from reflecting routes.
Precautions
The reflect between-clients command is run only on RRs.