remote-backup-profile bas-multicast

Function

The remote-backup-profile bas-multicast command binds a remote backup profile (RBP) to an interface on a vBRAS-UP.

The undo remote-backup-profile bas-multicast command unbinds an RBP from an interface on a vBRAS-UP.

By default, no RBP is bound to an interface on a vBRAS-UP.

This command is supported only on the NetEngine 8000 F1A.

Format

remote-backup-profile remote-backup-profile-name bas-multicast

undo remote-backup-profile remote-backup-profile-name bas-multicast

Parameters

Parameter	Description	Value
remote-backup-profile remote-backup-profile-name	Specifies the name of an RBP.	The value is a string of 1 to 128 characters.

Parameter

Description

Value

remote-backup-profile remote-backup-profile-name

Specifies the name of an RBP.

The value is a string of 1 to 128 characters.

Views

100GE interface view, 25GE interface view, 400GE interface view, Eth-Trunk interface view, GE electrical interface view, VE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

In a multicast UP dual-device hot backup scenario, an RBP must be configured. After an RBP is created, you must bind the RBP to an interface so that the RBP is applied to the interface. To bind an RBP to an interface, run the remote-backup-profile bas-multicast command.

Prerequisites

The UP mode of a device has been enabled using the cu-agent command in the system view.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Bind an RBP named test to GE 0/1/17 on a vBRAS-UP.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/17
[~HUAWEI-GigabitEthernet0/1/17] remote-backup-profile test bas-multicast