renew-time-percent rebind-time-percent

Function

The renew-time-percent rebind-time-percent command sets the renewal time and rebinding time of an IPv6 address pool.

The undo renew-time-percent rebind-time-percent command restores the default renewal time and rebinding time of an IPv6 address pool.

By default, the renewal time is 50% the preferred lifetime; the rebinding time is 80% the preferred lifetime.

This command is supported only on the NetEngine 8000 F1A.

Format

renew-time-percent renew-time-value rebind-time-percent rebind-time-value

undo renew-time-percent rebind-time-percent

Parameters

Parameter	Description	Value
rebind-time-percent rebind-time-value	Specifies the rebinding time of an IPv6 address pool. rebind-time-percent is the percentage of the rebinding time to the preferred lifetime. renew-time-percent must be smaller than rebind-time-percent by not less than 10. You can set the preferred lifetime by using the lifetime preferred-lifetime command.	The value ranges from 10 to 99, and the default value is 80.
renew-time-percent renew-time-value	Specifies the renewal time of an IPv6 address pool. renew-time-percent is the percentage of the renewal time to the preferred lifetime.	The value ranges from 10 to 99, and the default value is 50.

Parameter

Description

Value

rebind-time-percent rebind-time-value

Specifies the rebinding time of an IPv6 address pool. rebind-time-percent is the percentage of the rebinding time to the preferred lifetime. renew-time-percent must be smaller than rebind-time-percent by not less than 10.

You can set the preferred lifetime by using the lifetime preferred-lifetime command.

The value ranges from 10 to 99, and the default value is 80.

renew-time-percent renew-time-value

Specifies the renewal time of an IPv6 address pool. renew-time-percent is the percentage of the renewal time to the preferred lifetime.

The value ranges from 10 to 99, and the default value is 50.

Views

IPv6 address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipv6pool	write

Usage Guidelines

Usage Scenario

When you need to change the renewal time and rebinding time of an IPv6 address pool, you can use the **renew-time-percent rebind-time-percent ** command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the renewal time and rebinding time of a user-side delegation address pool named pool1.

<HUAWEI> system-view
[~HUAWEI] ipv6 pool pool1 bas delegation
Info: Create an ipv6 pool.
[*HUAWEI-ipv6-pool-pool1] commit
[~HUAWEI-ipv6-pool-pool1] renew-time-percent 55 rebind-time-percent 85