reset bgp flow vpnv4

Function

The reset bgp flow vpnv4 command resets specified BGP connections.

Format

reset bgp flow vpnv4 { all | as-number | ipv4-address | external | internal }

Parameters

Parameter	Description	Value
all	Resets all BGP connections.	-
as-number	Resets BGP connections with peers in ASs expressed in dotted notation.	The value is in the format of x.y, where x and y are integers that range from 1 to 65535 and from 0 to 65535, respectively.
ipv4-address	Resets the BGP connection with a specified peer.	It is in dotted decimal notation.
external	Resets all EBGP connections.	-
internal	Resets all IBGP connections.	-
flow	Resets BGP IPv4 connections in the BGP-Flow address family view.	-
vpnv4	Resets BGP connections associated with VPNv4.	-

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	execute

Usage Guidelines

Usage Scenario

The reset bgp command is used to make new BGP configurations take effect.

If a BGP routing policy is configured on the device that does not support Route-Refresh, the reset bgp command can be used to make the new routing policy to take effect.

Configuration Impact

This command resets all TCP connections established between BGP peers and therefore results in the re-establishment of the BGP peer relationships. Exercise caution when running this command.

Example

# Reset all BGP VPNv4 Flow Specification connections.

<HUAWEI> reset bgp flow vpnv4 all