The reset ip host packet statistics receive protocol command clears global statistics about protocol-specific received packets.
| Parameter | Description | Value |
|---|---|---|
| arp |
Specifies the ARP protocol. |
- |
| stp |
Specifies the STP protocol. |
- |
| lacp |
Specifies the LACP protocol. |
- |
| lldp |
Specifies the LLDP protocol. |
- |
| isis |
Specifies the IS-IS protocol. |
- |
| icmp |
Specifies the ICMP protocol. |
- |
| ospf |
Specifies the OSPF protocol. |
- |
| pim |
Specifies the PIM protocol. |
- |
| igmp |
Specifies the IGMP protocol. |
- |
| vrrp |
Specifies the VRRP protocol. |
- |
| snmp |
Specifies the SNMP protocol. |
- |
| dhcp |
Specifies the DHCP protocol. |
- |
| bgp |
Specifies the BGP protocol. |
- |
| ldp |
Specifies the LDP protocol. |
- |
| icmpv6 |
Specifies the ICMPv6 protocol. |
- |
| ospfv3 |
Specifies the OSPFv3 protocol. |
- |
| pimv6 |
Specifies the IPv6 PIM protocol. |
- |
| mld |
Specifies the MLD protocol. |
- |
| vrrpv6 |
Specifies the VRRP6 protocol. |
- |
| snmpv6 |
Specifies the IPv6 SNMP protocol. |
- |
| dhcpv6 |
Specifies the DHCPv6 protocol. |
- |
| bgp4plus |
Specifies the BGP4+ protocol. |
- |
| ldpv6 |
Specifies the IPv6 LDP protocol. |
- |
Usage Scenario
After you run the ip host packet statistics protocol all command to configure a device to collect statistics about protocol-specific received packets, you can run the reset ip host packet statistics receive protocol command to clear statistics about protocol-specific received packets.
The reset ip host packet statistics receive protocol command and display ip host packet statistics receive protocol command can be used together to help identify whether the device correctly receives various protocol packets.