reset igmp statistics

Function

The reset igmp statistics command deletes IGMP message statistics on BAS interfaces.

Format

reset igmp statistics { user-id user-id | all | all-user }

Parameters

Parameter	Description	Value
user-id user-id	Deletes IGMP message statistics of a specified user on BAS interfaces. user-id specifies a user ID.	The value is an integer ranging from 0 to 4294967295.
all	Deletes global IGMP message statistics of all users on BAS interfaces.	-
all-user	Deletes IGMP message statistics of each user on a BAS interface.	-

Parameter

Description

Value

user-id user-id

Deletes IGMP message statistics of a specified user on BAS interfaces.

user-id specifies a user ID.

The value is an integer ranging from 0 to 4294967295.

all

Deletes global IGMP message statistics of all users on BAS interfaces.

all-user

Deletes IGMP message statistics of each user on a BAS interface.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
igmp	execute

Usage Guidelines

Usage Scenario

To facilitate new IGMP message statistics lookup, you can run the reset igmp statistics command to delete existing IGMP message statistics if they are not needed. After the deletion is complete, you can run the display igmp statistics command to check whether all the statistics have been deleted.

Precautions

The deleted IGMP message statistics cannot be restored. Therefore, exercise caution when running the display igmp statistics command.

In VS mode, this command is supported only by the admin VS.

Example

# Delete IGMP message statistics of each user on BAS interfaces.

<HUAWEI> reset igmp statistics all-user

# Delete global IGMP message statistics of all users on BAS interfaces.

<HUAWEI> reset igmp statistics all

# Delete IGMP message statistics of user 10 on a BAS interface.

<HUAWEI> reset igmp statistics user-id 10