The reset ipsec statistics command clears statistics about protocol packets processed by IPsec.
| Parameter | Description | Value |
|---|---|---|
| sa-name sa-name |
Specifies the IPsec Security Association (SA) name. |
It is a string of 1 to 15 case-sensitive characters, spaces not supported. The characters can be letters or numbers, hyphens (-) not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
| slot slot-number |
Specifies the slot number on which IPsec component is running. |
- |
Usage Scenario
Before collecting statistics about protocol packets processed by IPsec in a specified length of time, you can run the reset ipsec statistics command to clear the original statistics.
Follow-up Procedure
Run the display ipsec statistics command to check statistics about protocol packets processed by IPsec.
Precautions
The statistics cannot be restored after being cleared. Therefore, confirm the action before running this command.