| Parameter | Description | Value |
|---|---|---|
| process-id |
Specifies an IS-IS process ID. |
The value is an integer ranging from 1 to 4294967295. |
| vpn-instance vpn-instance-name |
Specifies the name of the VPN instance to which the IS-IS process belongs. For the default VPN instance, this parameter is optional. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string. |
| virtual-access |
Species the IS-IS process inside the port extension system. |
- |
Usage Scenario
The reset isis all command is used when LSPs need be immediately refreshed. For example, after the area-authentication-mode and domain-authentication-mode commands are run, you can run the reset isis all command to clear the old LSPs remaining on the device. If an IS-IS process inside the port extension system is enabled, you can run the reset isis virtual-access all command to clear the LSPs exist in the IS-IS process inside the port extension system.
Precautions
Restarting an IS-IS process may interrupt services. Therefore, exercise caution when running the reset isis all command.