reset mld statistics

Function

The reset mld statistics command deletes MLD message statistics on BAS interfaces.

Format

reset mld statistics { user-id user-id | all | all-user }

Parameters

Parameter	Description	Value
user-id user-id	Deletes MLD message statistics of a specified user on BAS interfaces. user-id specifies a user ID.	The value is an integer ranging from 0 to 4294967295.
all	Deletes global MLD message statistics of all users on BAS interfaces.	-
all-user	Deletes MLD message statistics of each user on a BAS interface.	-

Parameter

Description

Value

user-id user-id

Deletes MLD message statistics of a specified user on BAS interfaces.

user-id specifies a user ID.

The value is an integer ranging from 0 to 4294967295.

all

Deletes global MLD message statistics of all users on BAS interfaces.

all-user

Deletes MLD message statistics of each user on a BAS interface.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
igmp	execute

Usage Guidelines

Usage Scenario

To facilitate new MLD message statistics lookup, you can run the reset mld statistics command to delete existing MLD message statistics if they are not needed. After the deletion is complete, you can run the display mld statistics command to check whether all the statistics have been deleted.

Precautions

The deleted MLD message statistics cannot be restored. Therefore, exercise caution when running the display mld statistics command.

In VS mode, this command is supported only by the admin VS.

Example

# Delete MLD message statistics of user 10 on a BAS interface.

<HUAWEI> reset mld statistics user-id 10

# Delete global MLD message statistics of all users on BAS interfaces.

<HUAWEI> reset mld statistics all

# Delete MLD message statistics of each user on BAS interfaces.

<HUAWEI> reset mld statistics all-user