The reset pim routing-table all command clears PIM status information in PIM routing entries.
reset pim routing-table all
reset pim vpn-instance vpn-instance-name routing-table all
reset pim routing-table group groupAddr mask { group-mask-length | group-mask-addr } source sourceAddr
reset pim vpn-instance vpn-instance-name routing-table group groupAddr mask { group-mask-length | group-mask-addr } source sourceAddr
| Parameter | Description | Value |
|---|---|---|
| vpn-instance vpn-instance-name |
Specifies the name of a VPN instance to which a PIM routing entry belongs. If this parameter is not specified, the command deletes PIM entries of the public network instance. |
The value is a string of 1 to 31 case-sensitive characters. It cannot contain spaces. The VPN instance name cannot be _public_. If the character string is quoted by double quotation marks, the character string can contain spaces. |
| group groupAddr |
Specifies the group address of a PIM routing entry. |
The value ranges from 224.0.0.0 to 239.255.255.255, in dotted decimal notation. |
| mask { group-mask-length | group-mask-addr } |
Specifies the mask length or mask address of a PIM routing entry group address. |
Mask length: The value is an integer that ranges from 4 to 32. Subnet mask: The value ranges from 240.0.0.0 to 255.255.255.255, in dotted decimal notation. |
| source sourceAddr |
Specifies the source address of a PIM routing entry. |
The value is in dotted decimal notation. If the specified PIM entry is a (*, G) entry, the source address is 0.0.0.0. |
Usage Scenario
You can run the reset pim routing-table command to clear PIM status information in all PIM routing entries or a specified PIM routing entry. After this command is run, data forwarding of the corresponding PIM routing entry is stopped.
Precautions
This command clears only the PIM status information of PIM routing entries, but does not clear the IGMP and static group join status information or BGP report entry information.