The reset y1731 statistic-type eth-test command deletes ETH-test results stored on a MEP that receives ETH-test packets.
| Parameter | Description | Value |
|---|---|---|
| ma ma-name |
Deletes ETH-test results in a specified MA. |
The value is a string of 1 to 43 characters, and hyphens (-) or question marks (?) are not supported. |
| mep mep-id |
Deletes ETH-test results stored on a specified MEP. |
The value is an integer ranging from 1 to 8191. |
| md md-name |
Deletes ETH-test results in a specified MD. |
The value is a string of 1 to 43 characters, and hyphens (-) or question marks (?) are not supported. |
Usage Scenario
Before starting an ETH-test instance, run the reset y1731 statistic-type eth-test command to delete existing ETH-test results stored on a MEP that receives ETH-test packets. If an ETH-test instance is complete and its data is not needed, also run this command to delete the data.
Configuration Impact
Once the reset y1731 statistic-type eth-test command deletes existing ETH-test information, the information cannot be restored. Exercise caution when using this command.