The reset bgp flow vpnv6 vpn-instance command resets BGP connections in the BGP-Flow VPNv6 address family view.
| Parameter | Description | Value |
|---|---|---|
| vpn-instance-name |
Displays the BGP routes of a specified VPN instance. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string. |
| as-number |
Resets BGP connections with peers in ASs expressed in dotted notation. |
The value is in the format of x.y, where x and y are integers that range from 1 to 65535 and from 0 to 65535, respectively. |
| ipv4-address |
Resets the BGP connection with a specified peer. |
It is in dotted decimal notation. |
| ipv6-address |
Resets the TCP connection with a specified BGP4+ peer (all the routes learned by using the connection are deleted). |
The address is in the format of X:X:X:X:X:X:X:X. |
| external |
Resets all EBGP connections. |
- |
| internal |
Resets all IBGP connections. |
- |
| all |
Resets all BGP connections. |
- |
Usage Scenario
The reset bgp command is used to make new BGP configurations take effect.
If a BGP routing policy is configured on the device that does not support Route-Refresh, the reset bgp command can be used to make the new routing policy to take effect.Configuration Impact
This command resets all TCP connections established between BGP peers and therefore results in the re-establishment of the BGP peer relationships. Exercise caution when running this command.