reset attack-source-trace

Function

The reset attack-source-trace command clears information about attack source tracing saved in the memory.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

reset attack-source-trace slot { slot-id | all }

Parameters

Parameter	Description	Value
all	Specifies all slot IDs.	-
slot slot-id	Specifies the slot ID.	The value is an integer that ranges from 1 to 31.

Parameter

Description

Value

all

Specifies all slot IDs.

slot slot-id

Specifies the slot ID.

The value is an integer that ranges from 1 to 31.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
cpu-defend	write

Usage Guidelines

Usage Scenario

If you run the reset attack-source-trace command, information about attack source tracing saved in the memory is cleared. The save attack-source-trace linktype command saves information about attack source tracing saved in memory as a file.

In VS mode, this command is supported only by the admin VS.

Example

# Clear information about attack source tracing saved in the memory of the interface board in slot 1.

<HUAWEI> reset attack-source-trace slot 1