reset capture-packet access information

Function

The reset capture-packet access information command clears information about obtained packet headers.

This command is supported only on the NetEngine 8000 F1A.

Format

reset capture-packet access information [ slot slot-id [ instance instance-id ] ]

Parameters

Parameter	Description	Value
slot slot-id	Specifies a slot ID based on which information about obtained packet headers is to be cleared.	-
instance instance-id	Specifies a instance ID based on which information about obtained packet headers is to be cleared.	The value is an integer ranging from 0 to 3.

Parameter

Description

Value

slot slot-id

Specifies a slot ID based on which information about obtained packet headers is to be cleared.

instance instance-id

Specifies a instance ID based on which information about obtained packet headers is to be cleared.

The value is an integer ranging from 0 to 3.

Views

All views

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	execute

Usage Guidelines

Usage Scenario

If information about obtained packet headers is no longer useful, run the reset capture-packet access information command to clear the information before you obtain packet headers again.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Clear information about obtained packet headers.

<HUAWEI> reset capture-packet access information