reset control-tunnel session

Function

The reset control-tunnel session command restarts a control channel connection.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

reset control-tunnel session peer-ip ip-addr

Parameters

Parameter	Description	Value
peer-ip ip-addr	Specifies a controller IP address.	The value is in dotted decimal notation.

Parameter

Description

Value

peer-ip ip-addr

Specifies a controller IP address.

The value is in dotted decimal notation.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
virtual-cluster	debug

Usage Guidelines

Usage Scenario

To disconnect and reestablish a control channel connection, run the reset control-tunnel session command. This command helps verify the control channel working process. Do not use this command in other situations.

In VS mode, this command is supported only by the admin VS.

Example

# Restart a control channel connection.

<HUAWEI> reset control-tunnel session peer-ip 2.2.2.2