reset flow-car

Function

The reset flow-car command clears flow CAR entries on a specific board or a device.

Format

reset flow-car all

reset flow-car [ { source-ip | destination-ip } ip-address ] slot slot-id

Parameters

Parameter	Description	Value
source-ip	Source-ip.	-
destination-ip	Destination-ip.	-
ip-address	Specifies a source or destination IP address.	The value is in dotted decimal notation.
slot slot-id	Specifies the slot ID of an interface board.	-
all	Clears flow CAR entries on a device.	-

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

When flow-car is run to configure flow CAR, if no traffic matches a flow CAR entry within 5 minutes, the system deletes the flow CAR entry. To manually delete a flow CAR entry, run the reset flow-car command.

To delete flow CAR entries on a device, run the reset flow-car all command.

To clear flow CAR entries with specific source IP addresses, run the reset flow-car source-ipslot command.

To clear flow CAR entries with specific destination IP addresses, run the reset flow-car destination-ip slot command.

Todelete all flow CAR entries on the board, run the reset flow-car slot command.

Example

# Delete flow CAR entries for the flow with the source IP address 10.1.1.1 in slot 1.

<HUAWEI> reset flow-car source-ip 10.1.1.1 slot 1