The reset port-queue statistics command resets statistics about port queues on an outbound interface.
| Parameter | Description | Value |
|---|---|---|
| cos-value |
Specifies the priority of a port queue. |
The value is an enumerated type and can be cs7, cs6, ef, af4, af3, af2, af1, and be. |
| outbound |
Displays the configuration for queues in the outbound direction of an interface. |
- |
| slot slot-id |
Specifies the slot ID of a board. In VS mode, this parameter is supported only by the admin VS. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. |
| interface interface-type interface-number |
Specifies an interface type and interface number. |
- |
Usage Scenario
If you consider at a moment that the previous port queue statistics on an interface to be useless or unreliable, run the reset port-queue statistics command to reset the port queue statistics on the interface.
Configuration Impact
Port queue statistics cannot be restored after being reset.
If running the reset port-queue statistics command to reset statistics about port queues on an interface, the user queue statistics is cleared as well. In multi-VS scenarios, after this command is configured on a trunk main interface, the command configuration is also effective for the trunk sub-interfaces that reside in other VSs.