The reset qos hard-pipe statistics interface outbound command clears hard pipe statistics about outgoing traffic on a PW-side or AC-side hard pipe interface.
This command is supported only on the NetEngine 8000 F1A.
reset qos hard-pipe statistics interface { interface-name | interface-type interface-number } outbound
Specifies an interface name.
-
Specifies an interface type and an interface number.
User view
2: Configuration level
Usage Scenario
To clear hard pipe statistics of outgoing traffic on a PW-side or AC-side hard pipe interface, run the reset qos hard-pipe statistics command.
<HUAWEI> reset qos hard-pipe statistics interface GigabitEthernet0/1/8 outbound
