reset service

Function

The reset service command clears service records.

This command is supported only on the NetEngine 8000 F1A.

Format

reset service { activate-fail-record | deactivate-record | update-fail-record }

Parameters

Parameter	Description	Value
activate-fail-record	Activate fail record.	-
deactivate-record	Deactivate record.	-
update-fail-record	Update fail record.	-

Parameter

Description

Value

activate-fail-record

Activate fail record.

deactivate-record

Deactivate record.

update-fail-record

Update fail record.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
vas	execute

Usage Guidelines

Usage Scenario

To prevent existing service records from affecting service exception cause identification, you can run the reset service command to clear the service records of a specific type before you reproduce a problem for troubleshooting.

Configuration Impact

Cleared service records cannot be restored. Therefore, exercise caution when running the reset service command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Clear service activation failure records.

<HUAWEI> reset service activate-fail-record

# Clear information about EDSG service update failures.

<HUAWEI> reset service update-fail-record

# Reset the record information about deactivating services.

<HUAWEI> reset service deactivate-record