reset smart-clock

Function

The reset smart-clock command resets an Atom GPS/GNSS module on an interface.

This command is supported only on the NetEngine 8000 F1A.

reset smart-clock

None

GE interface view

3: Management level

Task Name	Operations
clksync	execute

Usage Scenario

When an Atom GPS/GNSS module reports an alarm, run the reset smart-clock command to reset the Atom GPS/GNSS module.

This command is supported only by the admin VS.

# Reset the Atom GPS module on GE 0/1/0.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] reset smart-clock