reset traffic policy statistics interface

Function

The reset traffic policy statistics interface command clears the traffic policy statistics on a specified interface.

Format

reset traffic policy [ [ name ] policy-name ] statistics interface { interface-name | interface-type interface-number } [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid | vid vid | ce-vid ce-vid | vid vid ce-vid ce-vid ] { inbound | outbound }

Parameters

Parameter	Description	Value
name policy-name	Specifies the name of policy.	The value is a string of 1 to 127 case-sensitive characters.
interface interface-type interface-number	Specifies the type and the number of an interface.	-
interface-name	Specifies the name of an interface.	-
vlan vlan-id	Specifies a VLAN ID.	The value is an integer in the range 1 to 4094.
pe-vid pe-vid	Specifies a PE VLAN ID.	The value is an integer in the range 1 to 4094.
ce-vid ce-vid	Specifies a CE VLAN ID.	The value is an integer in the range 1 to 4094.
vid vid	Specifies the external VLAN ID of a specified interface whose traffic policy statistics is cleared.	The value is an integer in the range 1 to 4094.
inbound	Clears the statistics about the traffic policy applied to the interface in the inbound direction.	-
outbound	Clears the statistics about the traffic policy applied to the interface in the outbound direction.	-

Views

All views

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	execute

Usage Guidelines

Usage Scenario

This command can be used on:

GE interface
GE sub-interface
Eth-Trunk interface
Eth-Trunk sub-interface
QinQ termination sub-interface
Dot1q termination sub-interface
QinQ stacking sub-interface

For a Layer 3 interface, you can clear the statistics about the traffic policy on its sub-interface.

This command clears all the traffic policy statistics on an interface including the historical data.

If the traffic policy is a shared policy, this command clears the statistics on all the interfaces where the specified traffic policy is applied in the specified direction.

If a traffic policy of cascaded MF classification have been applied on an interface, the command reset traffic policy <policy-name> statistics can clear the specified traffic policy statistics on an interface.

Example

# Clear the traffic policy statistics on GE 0/1/0 in the inbound direction.

<HUAWEI> reset traffic policy statistics interface GigabitEthernet 0/1/0 inbound