reset vlan-statistics(User view)
Function
The reset vlan-statistics command clears user traffic statistics based on a specified inner or outer VLAN ID on a device.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| pevlan pevlan-id |
Clears statistics about user packets with a specified inner or outer VLAN ID from a specified interface. |
The value is an integer ranging from 1 to 4094. |
| cevlan cevlan-id |
Clears statistics about user packets with a specified inner VLAN ID from a specified interface. |
The value is an integer ranging from 1 to 4094. |
Usage Guidelines
Usage Scenario
When you run the display vlan-statistics command to check user traffic statistics based on a specified inner or outer VLAN ID on a device, a large number of historical statistics may be displayed, which makes data analysis difficult. To resolve this problem, run the reset vlan-statistics command to clear the existing statistics before running the display vlan-statistics command to view the newly collected statistics.
Precautions
Statistics cannot be restored after you clear them. Therefore, exercise caution when running the reset vlan statistics command.