reset web statistics packet
Function
The reset web statistics packet command clears statistics on the packets exchanged between a web authentication server and the device.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| ip-address ipv4-address |
Specifies the IP address of a web authentication server. |
The value is in dotted decimal notation. |
| vpn-instance string-value |
Specifies a VPN instance name. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
| ipv6-address ipv6-address |
Specifies IPv6 address. |
The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
Usage Guidelines
Usage Scenario
Before collecting statistics on the packets exchanged between a web authentication server and the NetEngine 8000 F over a specified period, run the reset web statistics packet command to clear the existing statistics.
Precautions
In VS mode, this command is supported only by the admin VS.