rip pkt-transmit

Function

The rip pkt-transmit command sets the interval at which update packets are sent by a specified interface and the number of packets sent each time.

The undo rip pkt-transmit command restores the default setting.

By default, interval, pkt-count, and bandwidth-value are 200 milliseconds, 50, and 99, respectively.

Format

rip pkt-transmit { interval interval | number pkt-count | bandwidth bandwidth-value } ^*

undo rip pkt-transmit

Parameters

Parameter	Description	Value
interval interval	Specifies the interval at which update packets are sent.	The value is an integer ranging from 50 to 500, in milliseconds.
number pkt-count	Indicates the number of packets sent each time.	The value is an integer ranging from 25 to 100.
bandwidth bandwidth-value	Specifies the percentage of the bandwidth for sending RIP packets to the total bandwidth.	The value is an integer ranging from 1 to 99.

Parameter

Description

Value

interval interval

Specifies the interval at which update packets are sent.

The value is an integer ranging from 50 to 500, in milliseconds.

number pkt-count

Indicates the number of packets sent each time.

The value is an integer ranging from 25 to 100.

bandwidth bandwidth-value

Specifies the percentage of the bandwidth for sending RIP packets to the total bandwidth.

The value is an integer ranging from 1 to 99.

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rip	write

Usage Guidelines

Usage Scenario

To configure the interval at which update packets are sent and the number of packets sent each time, run the rip pkt-transmit command, which improves RIP performance.

Example

# Set the interval at which packets are sent by GE 0/1/0 to 100 milliseconds and the number of packets sent each time to 60.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] rip pkt-transmit interval 100 number 60