rip summary-address

Function

The rip summary-address command configures a device to send summarized routes.

The undo rip summary-address command disables a device from sending summarized routes.

By default, route summarization is disabled on interfaces.

Format

rip summary-address ip-address mask [ avoid-feedback ]

undo rip summary-address ip-address mask

Parameters

Parameter	Description	Value
ip-address	Specifies the network IP address to be summarized.	The value is in dotted decimal notation.
mask	Specifies the IP address mask.	The value is in dotted decimal notation.
avoid-feedback	Disables an interface from learning the summarized routes advertised by itself.	-

Parameter

Description

Value

ip-address

Specifies the network IP address to be summarized.

The value is in dotted decimal notation.

mask

Specifies the IP address mask.

The value is in dotted decimal notation.

avoid-feedback

Disables an interface from learning the summarized routes advertised by itself.

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rip	write

Usage Guidelines

Usage Scenario

If avoid-feedback is set, an interface no longer learns the summarized route with the same IP address as that of the summarized route advertised by the interface, which prevents routing loops.

Example

# Set a summarized IP address.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] rip summary-address 10.0.0.0 255.0.0.0